Visit our Twitter feed for more great content
TRExp

TR4 & TR4A Forum

frame to body

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

Roywb Avatar
Roywb Roy Butler
Roseburg, OR, USA   USA
I noticed that when I took the body off of the frame there were small thin strips of rubber on top of the frame. Also in the new kit that I got. The Question. Is there a reason that I could not strip the whole frame with rubber as wide as the frame rails?

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
mgruber921 Avatar
mgruber921 Marvin Gruber
Florence, AL, USA   USA
You could, down side to me is more area to hold water on top of frame.
Marv

Geko Avatar
Geko Stef SG
Kuala Lumpur, WP, Malaysia   MYS
I suspect the idea is that both front and rear end must be allowed some kind of play which is adjusted with the shims while only the central part of the tub -cockpit- rests flat on the chassis. As for the the width, i reckon it doesn't matter



Edited 1 time(s). Last edit at 2019-01-16 11:19 PM by Geko.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster