Visit our Twitter feed for more great content
TRExp

Buy, Sell & Trade Forum

FS- '69 GT6+ radiator, rear diff, spring, driveshaft and misc. [Oregon, USA]

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

Silent Matt Matt A
Wimer, OR, USA   USA
Everything in the title plus dual brake and clutch master cores, rear side vents, grille, bonnet hinges. I also have the chrome trim off the bonnet, and all the parts in the pic.
No clue what it's worth, make me an offer.



Edited 3 time(s). Last edit at 2018-10-12 07:33 PM by Silent Matt.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
2018101295161557.jpg    77.7 KB
2018101295161557.jpg

2018101295173020.jpg    45.9 KB
Sign In or Register to view this photo
RacingDreamz Avatar
RacingDreamz Ben Jones
Mountain City, TN, USA   USA
Do you know the condition of the differential? Is it good, clunking, slipping or anything abnormal?

arturo64 Avatar
arturo64 Arthur T
Billings, MT, USA   USA
And a ratio for the diff would be good to know(I don’t need it). My question, after seeing your build plan, You gonna keep your speedo? Looking for a particular one so just wondering.



Arthur
68 spit
70 gt6+

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
Silent Matt Matt A
Wimer, OR, USA   USA
In reply to # 1571136 by RacingDreamz Do you know the condition of the differential? Is it good, clunking, slipping or anything abnormal?

It was my daily driver in '04 and didn't have any issues, but I did notice it has about .03" slop between the driveshaft flange and pinion splines.



Arthur, I can't find the speedo or tach. I'll post it if I do.

NFla Tom Tom N
Green Cove Springs, FL, USA   USA
Matt,

I may be interested in the diff. Can you recall if you had overdrive or not? Any change you could post the serial number?

Regards, Tom

Silent Matt Matt A
Wimer, OR, USA   USA
Tom,
No OD, and do you want car or is there a number on the diff?

NFla Tom Tom N
Green Cove Springs, FL, USA   USA
In reply to # 1571201 by Silent Matt Tom,
No OD, and do you want car or is there a number on the diff?

Thx for the quick response!

Sorry - should have been more accurate in my query.

There should be a serial number along the bottom of the differential case forward of the drive axles. It'll run parallel with the drive shaft on ridge of the casted spline. If you rotate the diff 180* from how you've got it sitting in the Radio Flyer you might be able to make it out.

Regards,
Tom



Edited 1 time(s). Last edit at 2018-10-13 05:20 PM by NFla Tom.

Silent Matt Matt A
Wimer, OR, USA   USA
Found it, I was looking for a cast number. It's KC58766



Edited 1 time(s). Last edit at 2018-10-13 09:33 PM by Silent Matt.

NFla Tom Tom N
Green Cove Springs, FL, USA   USA
In reply to # 1571335 by Silent Matt Found it, I was looking for a cast number. It's KC58766

Nice!

I'll shoot you a PM.

quikrx Ralph Hansen
Antioch, IL, USA   USA
1962 Triumph Herald 1200
1969 Triumph Spitfire MkIII "Gloria"
1987 Mazda RX-7 "Mistress"
2003 Toyota Celica GT-S "Natasha"    & more
have someone looking for a diff - if your possible deal falls through let me know

thanks

Silent Matt Matt A
Wimer, OR, USA   USA
Everything's still available, make an offer.

Silent Matt Matt A
Wimer, OR, USA   USA
Bump

Fictioneer Avatar
Fictioneer Doug Hirt
Colorado Springs, CO, USA   USA
Wondering what the shipping on a diff would cost? I'm thinking it might be more than price of the item.
Doug



"Mr. Filby, do you think he'll ever return?"
"One cannot choose but wonder. You see . . . he has all the time in the world!"

Silent Matt Matt A
Wimer, OR, USA   USA
About $60 to Colorado springs through FedEx. As rare as I keep reading these are, it's gotta be worth a little more than that...

arturo64 Avatar
arturo64 Arthur T
Billings, MT, USA   USA
I may have missed it but was the ratio confirmed as a 3:27?? if so then yes it's worth more than 60 bucks. if a 3:89 then..... nope.



Arthur
68 spit
70 gt6+

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster