TRExp

69 GT6+ Restoration Journey

69gt6stopp Paul Stopp

Home Page: Paul Stopp   CAN
Richmond, British Columbia, Canada
Total Posts: 20 Latest Post: 2017-11-08
Follow the RSS Feed to be notified of new posts

Journal Table of Contents
Highlighted journal entries are shown in bold with a short summary

2017

  Front Lip Spoiler (part 1) Nov. 2017 — 2017-11-08
The front apron on the GT6 seems to be very high visually so I decided to add a lip that would custo...
  13 Sept 2017 Rad. Valances — 2017-09-13
With my left over pieces of 20 ga. alum. sheet from my door cards, I have fabricated wing valances f...
  Sept. 2017- Inside Door Panels — 2017-09-09
Had decided that the inside door skins would be covered in alum sheet to provide a racer type look, ...
  July 2017 — 2017-09-09
I am writing this entry a little late. Made up a perforated metal cover for the EFI air intake plenu...
  Intake Scoop June 29-2017 — 2017-06-29
Because of clearance issues, the fitment of the Buick EFI V6 engine, the pipe hood reinforcement tha...
  Rear Hatch Inner Cover Panels — 2017-03-10
This week was back to some woodworking skills to make the rear hatch and back seat vertical panels. ...
  EFI Fuel Lines — 2017-03-03
Finally have completed running the new 3/8"fuel supply line and 5/16"return line from the EFI engine...
  Rear Electrical Sub-panel — 2017-02-24
When collecting parts from a salvage yard at the early stages of my build, I new I would need fuses ...
  Tunnel Cover Build -Phase 2 — 2017-02-22
This section deals with the detailed cutouts & covers involved in the transmission tunnel. The insid...
  Tunnel Cover Build -Phase 1 — 2017-02-22
A request was made that I should feature my transmission cover build. My need was to accommodate a G...
  Feb.18th 2017 — 2017-02-18
At last I have now completed all the re-wiring from scratch of my new dash layout complete with indi...

2016

  Dec. 31st 2016 — 2016-12-31
Have been busy working on the front suspension and brakes; installed new front shocks, upper ball jo...
  29th Nov.2016 — 2016-11-29
Completed a little more of the fuel delivery system with the addition of the secondary in line 20 m...
  20th November 2016 — 2016-11-20
Started work on the EFI system locating the fuel pump & filters to the trunk and below. Bought a Mar...
  8th Nov. 2016 — 2016-11-08
This week have been busy painting all the pieces before re-assembly, this included the rear frame & ...
  30th Oct. 2016 — 2016-10-30
This week was a lot of clean up with the rear suspension stripped, waiting for the bearings & bushin...
  25th Oct. 2016 — 2016-10-25
On my journey to replace the rotoflex couplings: in stripping the two rear axles I found the left si...
Update 15 Oct 2016 — 2016-10-15






Join The Club

Sign in to ask questions, share photos, and access all website features

Your Cars

1978 Triumph Spitfire 1500

Text Size

Larger Smaller
Reset Save

Sponsor Links